// BRIDGEPORT, CT · CHIMNEY SERVICE
Safe Chimney Services in Bridgeport
Keep your home safe and warm with our expert chimney services.
Experienced Team
Our skilled professionals are equipped with the knowledge and tools to handle all your chimney needs.
Comprehensive Services
From cleaning to repairs, we cover every aspect of chimney care to keep your home safe.
Local Expertise
Serving Bridgeport and nearby towns, we understand the specific needs of homes in our community.
Customer Focused
Your safety and satisfaction are our top priorities, ensuring a swift and reliable service experience.
FIG. 1 — SECTION THROUGH A MASONRY CHIMNEY
// SERVICES
Spec sheets
Chimney Cleaning
Ensure your chimney operates safely and efficiently.
S-02Chimney Inspection
Identify potential issues before they become serious problems.
S-03Chimney Repair
Address damage and ensure the longevity of your chimney.
S-04Chimney Cap Installation
Protect your chimney from weather and debris with a cap.
S-05Creosote Removal
Reduce fire risk with professional creosote removal.
S-06Chimney Relining
Enhance performance and safety with a new chimney liner.
S-07Fireplace Cleaning
Maintain a clean and efficient fireplace with regular cleaning.
S-08Dryer Vent Cleaning
Improve dryer efficiency and safety with vent cleaning.
S-09Masonry Repointing
Restore the integrity of your chimney with expert repointing.
S-10Chimney Waterproofing
Protect your chimney from water damage with waterproofing.
// ANATOMY
Click a part of the chimney
PART 01
Chimney cap
The chimney cap sits at the top of the chimney and prevents rain, debris, and animals from entering.
- Cap can become damaged or blown off during storms.
- Clogging from leaves and debris.
- Rust if made from metal.
PART 02
Crown
The crown is the top surface of the chimney that helps protect it from weather damage.
- Cracking due to freeze-thaw cycles.
- Water leakage through cracks.
- Deterioration over time.
PART 03
Flashing
Flashing is the metal layer between the chimney and roof, preventing water leaks.
- Corrosion or rust.
- Separation from the chimney or roof.
- Improper installation leading to leaks.
PART 04
Brick and mortar
These are the materials that make up the body of the chimney, providing structure and support.
- Cracking from age or weather conditions.
- Spalling due to moisture penetration.
- Weakened mortar joints.
PART 05
Flue liner
The flue liner protects the chimney walls from heat and corrosive byproducts of combustion.
- Cracks or holes compromising safety.
- Build-up of creosote or soot.
- Incorrect sizing affecting efficiency.
PART 06
Smoke chamber
Located just above the firebox, it helps funnel smoke up into the flue.
- Cracking from heat exposure.
- Soot and creosote build-up.
- Improper shaping causing smoke spillage.
PART 07
Damper
This adjustable plate sits above the firebox, controlling air flow and smoke release.
- Rust or corrosion causing it to stick.
- Improper sealing leading to heat loss.
- Warping affecting functionality.
PART 08
Firebox
The area where the fire is built, usually made of firebrick or refractory panels.
- Cracked bricks or panels.
- Heat damage reducing effectiveness.
- Ash and debris accumulation.
// FIELD PHOTOS
// TROUBLESHOOTING
What you notice, and what it usually means
| Ref | Symptom | Likely cause | Service |
|---|---|---|---|
| T-01 | Fireplace smells like smoke | Possible creosote buildup or blocked flue. | Creosote Removal |
| T-02 | Water stains on walls | Indicates potential leaks in the chimney. | Chimney Waterproofing |
| T-03 | Chimney bricks are crumbling | Potential mortar deterioration needing repair. | Masonry Repointing |
| T-04 | Soot falling into the fireplace | Requires chimney cleaning to address buildup. | Chimney Cleaning |
| T-05 | Draft problems when using fireplace | Could indicate a blockage or flue issue. | Chimney Inspection |
| T-06 | Excess heat in chimney walls | Might suggest a chimney lining problem. | Chimney Relining |
// PROCESS
The visit, as a flowchart
- STEP 1
Initial Inspection
We begin with a detailed inspection to understand the condition and requirements of your chimney.
- STEP 2
Service Proposal
Based on the inspection, we'll provide you with a clear plan of action and the services needed.
- STEP 3
Thorough Execution
Our team carries out the required services with precision, ensuring the highest standards.
- STEP 4
Final Checks
After the services, we conduct a final check to ensure everything is functioning correctly.
- STEP 5
Customer Briefing
We explain the completed work and provide maintenance tips to keep your chimney in good condition.
// BOOK
Open a work order
Welcome to Brick & Lantern Chimney & Flue Cleaning. Located at 4531 Main St, Bridgeport, CT, we specialize in comprehensive chimney services for your home. Serving the local community with dedication, we ensure your chimneys and fireplaces function efficiently and safely.
SERVICE AREA
- Bridgeport
- Stratford
- Fairfield
- Westport
- Easton
- Shelton
- Trumbull
- Monday7:30 AM – 5:30 PM
- Tuesday7:30 AM – 5:30 PM
- Wednesday7:30 AM – 5:30 PM
- Thursday7:30 AM – 5:30 PM
- Friday7:30 AM – 5:30 PM
- SaturdayClosed
- SundayClosed
Q01How often should I clean my chimney?
Chimneys should be inspected and cleaned at least once a year, especially before using them during colder months.
Q02What is creosote, and why is it a concern?
Creosote is a flammable byproduct of burning wood. It can build up inside chimneys and pose a fire hazard if not removed.
Q03Do I need a chimney cap?
A chimney cap is essential to prevent rain, debris, and animals from entering the chimney, enhancing safety and performance.
Q04What signs indicate chimney damage?
Look for cracked bricks, mortar gaps, or water leaks, which may suggest your chimney needs repair.
Q05How does chimney relining help?
Relining seals the flue, improving safety and efficiency by preventing damage from heat and combustion byproducts.
Q06Can I clean my chimney myself?
While some cleaning tasks can be attempted, professional cleaning ensures thorough removal of creosote and soot.
Q07What is masonry repointing?
Repointing involves renewing the external part of mortar joints in masonry, crucial for structural integrity.
Q08Why is dryer vent cleaning important?
Cleaning dryer vents prevents lint buildup, which can lead to overheating and potential fires.